ESD Powder Coating
PRODUCT DATA SHEET
This is an Epoxy-Polyester Hybrid Powder designed to provide static dissipative properties. To be used on OEM applications where a ESD safe surface is required. Also available in Dark Gray and Off White.
It is designed for electrostatic application on metal substrates. Exposure to direct sunlight will degrade the color and gloss, so it is recommended for use indoors only.
· Designed to provide surface resistance in the static dissipative range (104 to 1011 ohms at 100v).
· Provides excellent film quality, leveling and flow.
Good chemical and salt spray resistance.
| || || |
Standard iron and zinc phosphate on clean steel is appropriate. High humidity or severe environmental resistance requires cleaner substrates to maintain a good bond between metal and coating.
Electrostatic application to room temperature substrate is recommended. Reduced voltages can improve coating film thickness uniformity.
The technical data and suggestions for use in this product data sheet are currently correct to the best of our knowledge, but are subject to change without notice. Because application and conditions vary, and are beyond our control, we are not responsible for results obtained in using this product, even when used as suggested. The user should conduct tests to determine the suitability of the intended use. Any liability we may have with respect to a product or its use (including liability for breach of warranty, strict liability in tort, negligence or otherwise) is limited exclusively to replacement of the product or refund of its price. Under no circumstances are we liable for incidental or consequential damages.
| || || |